1x PRV D3220Ti Titanium Compression 2" Driver 8 Ohm 300W + WGP14-50 Pink Horn

Description: INCLUDES: 1x D3220Ti 2″ High frequency Driver 300 Watts 8 Ohm – Titanium Diaphragm with 1x WGP14-50 Pink CR 2" Exit Horn FeaturesD3220Ti Innovative technology for 3 inch compression drivers, the new high-strength compact motor, allows you to keep a large voice coil without sacrificing performance. With a smaller design and as powerful as ever, this high frequency 2″ exit driver is taking the industry to the next level!The new D3220Ti design still retains the same diaphragm design as the previous model. This offers the famous PRV Audio crisp high output on high frequency response, with accuracy (from 1200 to 17,000 Hz) with an emphasis on the critical upper frequency range.Pure Titanium diaphragm with large 3″ Voice Coil, providing the lowest possible moving mass with excellent efficiency – 108 dB Sensitivity.Works great with any Shallow Horn fromWGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver with crystal clear, high impact highs response from 1200 to 17,000 HzPRO Audio high frequency driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ti ferrite titanium compression horn driver, offers the best performance for the price, features a compact magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 5.71″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series.Make your system unique with our colored horns. Available on Single Color, Dual Color, and Dual Tone Finish. The titanium diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 1400 Hz at 12 dB per octave filter Crossover / BT121200 Hz at 18 dB per octave filter Crossover / BT18The pure titanium diaphragm of this driver provides crisp output focusing on vocals and high-frequency response, making it our most famous high-frequency driver! GENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m108 dBRecommended Hi Pass CrossoverFor Full Power Handling1400 Hz12db/oct CrossoverFrequency Response at -10dB1,200 – 17,000 HzVoice Coil Diameter3” (76 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.77 TMagnet MaterialFerrite WGP14-50 Pink CR 2″ Exit – ABS Plastic Wave Guide – Bolt-onHighlights2” Throat DiameterLight weightBolt-on45° x 45° Nominal Coverage GENERAL SPECIFICATIONSThroat Diameter2” (50.8 mm)Mounting TypeBolt-onHole Dimensions0.31″8 mmBolt Circle4″101.6 mmNominal Coverage Horizontal45°Vertical45°Flare typeExponentialMaterialPlastic (ABS)Finish / CoatingSeveral ColorsDimensions Height6.92″ (175.7 mm)Width6.92″ (175.7 mm)Depth5.30″ (134.6 mm)Mounting Depth5.02″ (127.6 mm)Baffle Cutout Diameter Circle5.75″ (146 mm)Net weight0.51 lb (0.23 kg)

Price: 96.82 USD

Location: Pompano Beach, Florida

End Time: 2024-10-26T11:14:22.000Z

Shipping Cost: 0 USD