2 Channel Electronic Ultrasonic Antifouling Unit System Protect Boat Marine Hull

Description: Description - HullSonic.com This is a 2 Channel unit. For more than 2 channels, multiple units can be used. Features • Helps keep the hull of your boat clean and free from most marine growth • Reduces drag and increases your fuel economy • Frequency of slipping for antifouling treatment is reduced enormously • Typically cheaper than a slip, clean and antifouling paint job • Safe for the environment, no harsh chemicals involved • Double Output, suitable for vessels up to 10m (30ft) long Introduction The HullSonic Ultrasonic Antifouling System is designed to replace the messy, expensive and dangerous antifouling chemical paints that you have had to use in the past to prevent marine growth. As Marine growth activity can be very aggressive the HullSonic Ultrasonic Antifouling System works best when installed after a fresh hull clean and new antifouling paint job. Be assured, however, that the HullSonic Ultrasonic Antifouling System will add years to an antifouling paint job no matter how hostile your marine environment! Marine Growth on Boat Hulls Marine organisms will attach to virtually any underwater surface if that surface remains immobile for even a short amount of time, marine growth will start. Marine growth typically attaches to your boat hull to catch tiny organisms that drift by from tidal activity. Left alone the underside of your boat will look like it has a thick, green carpet! Normally a hull is painted with a product called antifouling paint to prevent this from happening. Antifouling paint has some dangerous chemicals in it to deter marine organisms from settling on your hull. It was soon found that these chemicals fell out of the paint and entered the environment and were deadly to oysters, mussels and other marine life. These chemicals were banned. Today's antifouling paint has far more benign chemicals (which are less effective) but operate in a different way. When the marine organism attaches to the hull (and therefore the paint), the paint flakes off taking the organism with it. Of course this only works for so long before you need to apply a new coat of antifouling paint. Recommended Transducer Locations - Power Boat Monohull Up to 10m Vessel HullSonic Double (2 Transducers) Optional - extra transducers for added protection with a Quad device. Vessels with twin shaft should consider a Quad for 2 extra transducer location choices. Up to 20m Vessel HullSonic Quad (4 Transducers) Optional - extra transducers can be included for added protection. Consideration should be given to targeted protection for rudders, thrusters, etc. Recommended Transducer Locations - Sail Boat Monohull Up to 10m Vessel HullSonic Double (2 Transducers) Optional - extra transducers for added protection with a Quad device. Consideration should be given to targeted protection for rudders, thrusters, keels, etc. Contact Us below for help with this. Up to 20m Vessel HullSonic Quad (4 Transducers) Optional - extra transducers can be included for added protection. Consideration should be given to targeted protection for rudders, thrusters, etc. Recommended Transducer Locations - Catamaran Up to 10m Vessel HullSonic Double (2 Transducers) Optional - extra transducers for added protection with a Quad device. Consideration should be given to targeted protection for rudders, thrusters, keels, etc. Contact Us below for help with this. Up to 20m Vessel HullSonic Quad (4 Transducers - 2 x HULLSONIC HS200 UNITS) Optional - extra transducers can be included for added protection. Consideration should be given to targeted protection for rudders, thrusters, etc. How the Antifouling Unit Works Inside the main control box is a specially programmed microprocessor which centrally controls the system, calibrating to your vessel shortly after being turned on it will then send out a range of ultrasonic pulses with varying frequencies to the external transducer units. These transducers are attached with epoxy to the inside of the vessel's hull, transferring the ultrasonic pulses directly into the hull. The hull then vibrates in tune with the ultrasonic wave pulse, making for an uncomfortable environment for marine growth. Indeed, it would be like trying to go to bed in the front row of a heavy metal concert! The ultrasonic pulses are outside the range of human hearing, and are attenuated after about 10 metres through water. If your boat is in a pen the boats each side may partially benefit from reduced growth as well! Power is supplied by 12VDC, making wiring installation easy. A low voltage cut-out feature is also included, which protects the boat's batteries from being overused It is ideal if your boat is in a pen with AC shore power constantly charging your batteries. If you are on a mooring without shore power, wind or solar charging is strongly recommended. Remember, if the 12VDC supply to the HullSonic Ultrasonic Antifouling System fails, it stops keeping the marine growth at bay. NOTE: Larger vessels can simply use multiple units. Twin hull vessels will require double the recommendations above. >>> Download INSTALLATION MANUAL. Package Includes: 1 x Main control box containing all electronics, with 5m power supply lead1 x Inline fuse including 10A fuse 2 x Ultrasonic transducers, 2 x 7m transducer cable2 x Ultrasonic Transducer mounting footprintsJB Weld Epoxy Adhesive Product Satisfaction Guaranteed: If you are not totally happy with our product, return the item to us within 30 days from day of auction ends or day of Buy Now. Note that item returned must be in its original packaging with all accessories, and is in resalable condition, we will gladly refund you the total amount less Shipping & Handling cost. Technical Specifications Input: 12VDC Consumption: Average 250mA @ 12VDC Standby Consumption: Average 15mA @ 12VDC Input: 12VDC Consumption: Average 500mA @ 12VDC Standby Consumption: Average 15mA @ 12VDC 1 x Transducer 2 x Transducers 1 x HULLSONIC20 Control Module 1 x HullSonic Transducers (Model HS-50) 1 x 5m cable. 1 x Mounting Footprint 1 x JB Weld Epoxy Kit 1 x Loctite 515 1 x Instruction / Installation Manual 1 x HULLSONIC20 Control Module 2 x HullSonic Transducers (Model HS-50) 1 x 5m cable, 1 x 10m cable. 2 x Mounting Footprint 1 x JB Weld Epoxy Kit 1 x Loctite 515 1 x Instruction / Installation Manual 2 protected transducer outputs. 50W peak output. Comes with 1 Transducer, upgradable with a second. 2 protected transducer outputs. 50W peak output. Comes with 2 Transducers. Internal Temperature control system with active compensation ensures system never exceeds operating range, increased life of electronics and optimal protection Internal power monitoring Onboard Monitoring and Isolation Function Individual onboard Fuse for protection Sealed Enclosure (IP65) Dust Proof & Water Resistant IP68 Transducers Low Voltage Input (12VDC) Ignition Protected Transient Voltage Protection Battery Monitoring with Automatic Low Battery Shut Off. Sleep Function: 3 or 6 Hour Sleep modes. Button on front panel of module. Press once to enable 3 hours sleep - Press twice to enable 6 hours. The unit will then countdown the timer automatically and return to normal operation when complete. When Sleep is operating the Status LED will remain Blue. Transducer operation will cease until the countdown expires. Error Notifications: Detailed Error status will be displayed using the Status LED. Buzzer will sound on Errors to attract attention to the problem. Power Button: Main Power On/Off control Active Self Monitoring: Internal Input and Output Current Monitoring, Temperature Monitoring and Active Output control ensures ultra long operating life and best possible Ultrasonic Protection. Shipping Info Please note, S&H includes shipping and handling cost, as well as insurance cost if items are shipped to an Australian address, this fee is not negotiable PICKUPS: Please note, pick up is NOT available for eBay items, as we process all eBay orders in other location, or through our suppliers directly. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibilityv. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying Payment Info Payment methods accepted: Internet Direct Deposit (preferred method) Bank deposit Money order Bank Cheque PayPal Sorry, no personal cheque or company cheque accepted. Terms and Conditions Please do not bid if you disagree with the following terms & conditions: Please use eBay checkout or the "Checkout" button on the listing to check out all winning items. All auction winning prices include GST. The Shipping and Handling fees include postage, handling and insurance as well. Please do not bid if you do not agree with it. None Paying Bidder will be reported to eBay after 7 days if no response and no payment received, and item will be re-listed. All items are sent via Australia Post or other courier company. However, we are not directly liable for the late delivery or goods being missing or damaged during transit. If such an event should happen, the replacement will be sent out after we receive the confirmation of lost item from Aus Post or Courier Company. Please allow up to 4 weeks for the investigation to be processed. Appropriate feedback will be given after transaction is completed and buyer feedback is received If problems do arise, please contact us prior to leaving feedback, we will try our best to resolve any issues in accordance with our policies. NO pickup service is provided. Please do not ask Product Satisfaction Guaranteed: If you are not totally happy with our product, return the item to us within 30 days from day of auction ends or day of Buy Now. Note that item returned must be in its original packaging with all accessories, and is in resalable condition, we will gladly refund you the total amount less Shipping & Handling cost. Warranty Return Policy: Warranty issue: Please refer to our eBay auction listings for warranty information. Should item becomes faulty or DOA, if item carries warranty and it's within the warranty period, please refer to the Warranty Form inside your item package, or contact us to require a Warranty Form. Buyer is liable for the postage to return faulty/DOA product for warranty repair or refund. While all care is taken, any error or omission is unintentional. We are liable for sending replacement or warranty repair item back to the buyer, except in the case that the returned item is tested not faulty. In which case, it is the buyer's liability to pay for the postage cost to send the item back to buyer. Copyright © HullSonic.com.au. All right reserved. While all care is taken, any error or omission is unintentional

Price: 1299 AUD

Location: Coomera, QLD

End Time: 2023-11-18T22:42:18.000Z

Shipping Cost: 32.63 AUD