ADE Motion Awake RD3-028 Ares Red Dot +Shield +1911 Novak Rear Sight Optic Plate

Description: Comes with an ADE RD3-028 Ares Motion Awake RED dot sight, a picatinny plate(pre-assembled), and an optic mounting plate designed to fit 1911 pistols with standard Novak(does NOT fit Novak OVERSIZE) rear sight cut by replacing the factory rear sight on standard NOVAK dovetail.1911s have several different rear sight dovetail cuts, such as Colt(G.I.) Standard, LPA, Novak standard/traditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standard/traditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Please confirm with your pistol manufacturer what rear sight you have before purchasing.This optic plate for Novak Does NOT fit any Novak cut that is NOT GENUINE/traditional/true Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut.Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s. While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.One of the advantage of this ADE plate over others is this optic plate has a CURVED/CONCAVED design that will sit flush(wrap the top curved pistol slide) on the top of the pistol. Many other plates are Flat design. The optic plate for 1911 with Standard Novak rear sight requires removal the rear sight and disassemble the pistol. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque(12in/lb) will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. If you are NOT sure if this red dot will fit your pistol, please Click HERE to send us a message of EXACT model of your pistol, we will let you know if you need a optic plate(it could an aftermarket plate to replace the rear sight, or pistol factory provided plate for Optic Ready pistol) and we will provide precise information of the plate you need. You will receive the reply within 8 hours Monday-Sunday. When you first receive the ADE red dot. It might have a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depending on the ADE model). Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately.ADE is releasing the 2023 PRO SERIES for ADE RD3 series that fits a varieties of popular optic footprint on the market. The additional features that the PRO series includes are Multi Reticle Technology(only on select models, read product description to see if this model is equipped), Motion Awake System and are a new cosmetic redesign by ADE in Oregon City, Oregon. ADE RD3-028 Ares Pro is equipped with the Motion Activated System. While the Ares Pro is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Users also have the option to manually turn the red dot power off to disable the Motion Activated System. The overall length is longer than traditional red dot, therefore it only fits on the optic plate that sits ABOVE the slide( typically the plates replacing the rear sight). It does not sit into pistol slide with a milled optic cut because those cuts are typically made for red dots with standard length. The dimension for Ares is 1.84" length x1.30" width x1.15" height ADE RD3-028 Ares Pro is designed with a removeable Weather Shield that protects the sight from moisture and provides a clearer sight picture during inclement weather. Once installed the weather shield will protect from rain or snow and will stay attached even when mounted on a handgun. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Side Battery Load System, no need to Remove the sight to change the Battery. Shockproof, Fogproof. 3.5MOA red dot. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 Comes with a removeable picatinny plate, lens cloth, instruction, tool, battery and a removeable weather shield. Payment We accept any payment method ebay allows such as paypal at the checkout. Shipping We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day. Free shipping within 1 business day with tracking number. No international shipping!Other You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange. If you have any question, please click contact seller. We always reply emails within 8 hours.Purchase Eligibility We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your bid. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item.

Price: 124.99 USD

Location: Oregon City, Oregon

End Time: 2023-10-06T18:34:41.000Z

Shipping Cost: 0 USD