God's Grace - Iron on Rhinestone Transfer - Bling, Religious iron on template

Description: RHINESTONE PRESSING INSTRUCTIONS: 1. Preheat home iron to cotton setting. OR heat press at 320 Do NOT use a hand held wood iron. It gets too hot. 2. Carefully remove transfer from cardboard packaging. 3. Peel off textured backing from the design (stones should stick to the clear plastic sheet). If any of the stones have shifted out of place, put them back in place using tweezers. 4. Place plastic sheet, stone side down on fabric and press into place with hand. The clear plastic sheet should stick to the fabric. 5. Place iron over design area and apply steady pressure for 15-30 seconds - DO NOT MOVE IRON AROUND AS STONES MAY SHIFT – 6. Turn Garment WRONG SIDE OUT and Place iron over design area for another 15 seconds and repeat. 7. Set aside and allow cooling for 3 to 5 minutes. 8. Turn fabric to right side out. Slowly and carefully peel the clear plastic sheet away from the fabric. If all stones are not sticking, you may re-iron on the normal side of the fabric again. Make sure there isn’t anything on the garments before ironing. Softener from washing or stickers from the store that left a glue residue Best Care: Wash inside out and air dry. *****Wear To Start is NOT responsible for garments for any reason. Look over carefully prior to ironing. Make sure the back of the transfer is free of plastic or debris. Use tweezers to remove any unwanted materials that might have been missed from the transfer, or to put the rhinestone back in place if they moved from original location on the carrier Doing a one stone test is best. Gives you an idea how hot the iron is or how long you need to press it.****

Price: 11.95 USD

Location: Fallbrook, California

End Time: 2024-09-19T21:35:46.000Z

Shipping Cost: 4.6 USD