Kung Fu Flash, C64, Commodore 64 (ready-to-use / kit / PCB)

Description: Kung Fu Flash, C64, Commodore 64 (ready-to-use / kit / PCB) Kung Fu Flash is a Commodore 64 cartridge by Kim Jørgensen that is able to emulate other cartridges, such as Epyx Fastload, Super Snapshot v5, as well as load PRG files and use D64 disk images. This enables you to play most of your favourite C64 games directly from this cartridge. As Kim describes it: "Just place your desired CRT, PRG or D64 files on a FAT formatted microSD card and use the built-in launcher to execute them." Kim Jørgensen's Github page with Kung Fu Flash software, descriptions, guides, BOM lists and everything else you need: github.com/KimJorgensen/KungFuFlash AutumnHippo sells the Kung Fu Flash in the following variations: Ready-to-use: Fully assembled cartridge board, ready to insert into your Commodore 64 with the chip pre-programmed. No soldering required. All you need to do is supply your own MicroSD card with your favorite games or programs. The MicroUSB socket is not included, as most people will not need it with the firmware already flashed, but if you really need it, then contact me when ordering and I will mount it for you.Kit: The PCB with most of the components already mounted, as well as the rest of the components loose. You will need to mount these components yourself: MicroSD-card socket, MicroUSB socket (optional), and 3 tactile push buttons, as well as program the chip.PCB only: Just the bare circuit board with no components. Source your own components via Kim Jørgensen's BOM list, solder everything yourself, and program the chip. Please note, the PCB only and kit variations will require a certain soldering skill level. Involves soldering pretty small surface-mount components, which is probably not a good beginner's project, but should not be a problem for an experienced solderer. The Kung Fu Flash reviewed by Adrian's Digital Basement. Kung Fu Flash is a Commodore 64 cartridge by Kim Jørgensen that is able to emulate other cartridges, such as Epyx Fastload, Super Snapshot v5, as well as load PRG files and use D64 disk images. This enables you to play most of your favourite C64 games directly from this cartridge. As Kim describes it: "Just place your desired CRT, PRG or D64 files on a FAT formatted microSD card and use the built-in launcher to execute them." Kim Jørgensen's Github page with Kung Fu Flash software, descriptions, guides, BOM lists and everything else you need: github.com/KimJorgensen/KungFuFlash AutumnHippo sells the Kung Fu Flash in the following variations: Ready-to-use: Fully assembled cartridge board, ready to insert into your Commodore 64 with the chip pre-programmed. No soldering required. All you need to do is supply your own MicroSD card with your favorite games or programs. The MicroUSB socket is not included, as most people will not need it with the firmware already flashed, but if you really need it, then contact me when ordering and I will mount it for you. Kit: The PCB with most of the components already mounted, as well as the rest of the components loose. You will need to mount these components yourself: MicroSD-card socket, MicroUSB socket (optional), and 3 tactile push buttons, as well as program the chip.PCB only: Just the bare circuit board with no components. Source your own components via Kim Jørgensen's BOM list, solder everything yourself, and program the chip. Please note, the PCB only and kit variations will require a certain soldering skill level. Involves soldering pretty small surface-mount components, which is probably not a good beginner's project, but should not be a problem for an experienced solderer. The Kung Fu Flash reviewed by Adrian's Digital Basement. eBay integration by

Price: 8.13 USD

Location: Kolding

End Time: 2024-10-20T17:55:18.000Z

Shipping Cost: 7 USD