sE Electronics sE7 Small Diaphragm Condenser Microphone

Description: The sE7: A compact & classy condenser. sE7 sE7 microphone mic clip (with thread adapter) wind screen The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. With an optimized acoustic design, discrete class-A circuitry and a transformerless output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs or a lack of low-frequency punch. The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards. Capsule Type: 1/2“ back-electret condenser capsule Polar Pattern: Cardioid Frequency range: 20 Hz - 20 kHz Sensitivity: 19 mV/Pa (-34.5 dBV) Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad) Equivalent noise level: 16 dB(A) Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad) Signal to Noise Ratio: 78 dB Low-cut filter: 80 Hz, 6 dB/Oct, switchable Attenuation Pad: 20 dB, switchable Powering: 48 Volts according to IEC 61938 Electrical Impedance: <200 Ohms Recommended load impedance: >1k Ohms Current consumption: 3.0 mA Connectivity: 3-pin male XLR connector Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in) Weight: 128 g (4.52 oz.)

Price: 109 USD

Location: Goshen, Indiana

End Time: 2024-02-25T15:52:34.000Z

Shipping Cost: 0 USD