Spa Heater Assembly Replacement 58117 for Balboa M7 VS 4.0kW 240V 1.0kW 120V

Description: Spa Heater Assembly Replacement 58117 for Balboa M7 VS 4.0kW 240V 1.0kW 120VWide Application: This heater is specifically designed for Balboa VS, EL, TS, GS and BP Series control systems, which is a perfect replacement for Balboa part # 58117.Direct Replacement: This heater can be a convenient substitution for a great deal of models, including 58104, 58120, 55033-01, 58106, 58117, 55033-02, 58056, 58109, 55035-01, 55035, 58064, C2400-0807-TPS, 58120, 58148, 26-0540-5S-KS, 58032, 58281, 58114, 55033, 55625, G7410, 53408. Please refer to description below for other compatible models.Reliable Performance: The 58117 M-7 Heater Assembly is designed as a replacement heater for hot tubs and spas, equipped with its own sensor and installed in the front for easy maintenance by users.Solve the problem of circuit breaker tripping caused by corrosion of old heating elements, replace your old or broken heaterHigh-Quality Material: The heater is made of 316 stainless steel, which provides high corrosion resistance and durability, ensuring long-term use without rusting or damage.Great Compatibility --- This heater can also replace the following heater part numbers:52756,55624,55625,55689,55813,56487,58000,58002,58010,58016,58032,58083,58086,58089,58091,58103,58104,58105,58117,58121,58123,58130,58148,58209,55464,55473,103017,106957,58064,26-0807-5S-K, 26-0807-7S-K,26-807-5S-KS, 48-SP40-SB,48-SP55-FB,740-0617,740-0655,9711-207, C2400-0807,C2400-0807-TPS,C2550-0807,C2550-0807-TPS, X300713,X300930, X300935,X300943,X333131,X801761Product DiemensionSeries: M7, LE, VALUE, ELManifold Length: 15"Manifold Diameter: 2"Kilowatt Rating: 4.0KW / 1.0KWVoltage Rating: 240V / 120VNumber of Mounting Studs: 2Tail Pieces Included: Yes (removable)Tail Piece Size: 2" x 2" (removable)Installation Notes Step 1: Disconnect the power supply of the equipment.Use an open end wrench to slowly crack the heater split nuts until the water in the pipe flows out Step 2: Locate the 2 sensors holder on the circuit board.Remove the 2 heater sensors by depressing the clip and gently pulling on the wire to remove each sensor cable Step 3: Use a 3/8” wrench to remove the 2 nuts holding the heater in place Step 4: Use a 3/8” wrench to remove the nuts on the copper straps.Then lift the copper straps Step 5: Use an open end wrench to loosen the heater split nuts and remove the old heater assembly and gaskets Step 6: Replace the new gaskets and install the new heater assembly, tighten the split nuts with an open end wrench. Step 7: Screw on the 2 nuts that holding the heater, insert the 2 heater sensors into the sensor bracket on the circuit board, make sure the copper strip is connected to the heater and tighten the nuts. Step 8: Put the cover on and screw on the 2 screws on the top of the enclosure. Turn on the water valve and pump, restore the power of the equipment, and test What You Get1 heater, 1 pair of 2. 0" heater split nuts, 1 pair of 2. 0" heater tailpieces with o-ring gaskets. PaymentShippingReturn & WarrantyLeave feedbackContact usPayment1.We accept PayPal payment and many other payments. Items will be shipped within 1 business day of receiving full payment. Shipping1.All items will be shipped out in 1 business day,no expedited service available.2.Our items will be delivered within 4-6 business days. 3.We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory Return & Warranty1. 60 Days Free Returns, please notify us within 60 days after you've received your purchased item. 2. All return requests must be submitted through your eBay account. 3. Return shipping shall be the responsibility of the buyer. We pay the shipping when it is our fault. 4. Items to be returned must be in resalable condition. 5. All returns are for refund ONLY. No exchange accepted. Leave feedback1.If you are not satisfied for any reasons, please do not be so quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problems for you and always leave positive feedback to all our customers. 2.If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 scores DSR. Thanks!Contact us1.Any Questions,Just feel free to contact us on eBay.We will reply you in 1-2 business day.

Price: 145.98 USD

Location: Walton, Kentucky

End Time: 2024-02-07T04:19:42.000Z

Shipping Cost: 0 USD