TRIPLEXER 20M/15M/10M

Description: Normal 0 false false false EN-US X-NONE X-NONE HIGH BAND TRIPLEXER 20M/15M/10M 32dB","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":23,"style":"BOLD"},{"offset":0,"length":23,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"1r2ah","text":"Return Loss: >26Db","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":19,"style":"BOLD"},{"offset":0,"length":19,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"8chp9","text":"VSWR: 1.1","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":9,"style":"BOLD"},{"offset":0,"length":9,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"3lcm8","text":"Hi-Q Precision Silver Mica capacitors, and heavy-duty inductors, are used in the L/C tuned circuits. Each Triplexer is individually tuned on a state of the art computer testing system. ","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":185,"style":"BOLD"},{"offset":0,"length":185,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"713hg","text":"These designs are over-engineered, with vigilant consideration to component selection. No expense was spared to insure the reliability and performance of our filters. All inductors are wound with the largest possible gauge wire, consistent with sensible design practices. ","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":272,"style":"BOLD"},{"offset":0,"length":272,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"47f1s","text":"Low Band Systems HF Multiplexers:","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":33,"style":"BOLD"},{"offset":0,"length":33,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"73ijn","text":"Low Band Triplexers are available in 160M/80M/40M amateur band coverage.","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":72,"style":"BOLD"},{"offset":0,"length":72,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"43uti","text":"Low Band Diplexer(s) enable multi-transceiver stations to share a single multi-band antenna. They make multi-op antenna operations easy. Connect two or more transceivers, via a band pass filter(s), to a single multi-band antenna, capable of the preferred bands, and operate multiple radios all together on one antenna! \n ","type":"unstyled","depth":0,"inlineStyleRanges":[{"offset":0,"length":321,"style":"BOLD"},{"offset":0,"length":321,"style":"ITALIC"}],"entityRanges":[],"data":{}},{"key":"4m5p7","text":"Both model of Triplexers are supplied with standard SO-239 connectors, others are available on request. These Low Band Triplexers are great for Field Day, contesting and multi-op DXing. Perfect anytime the operation of multiple rigs, on one multi-band antenna is needed. Any multi-band resonant antenna can be used with our triplexers. It is essential that a Made in the USA. Triplexers and Band Pass filters, are the primary choice of multi contest stations around the world! They provide the advantage of a dramatically lower noise floor for enhanced single-band weak signal reception favored for contest and Field Day operations. 10M/15M/10M HF TRIPLEXER Can be used as a diplexer. Simply terminate the unused band with a 50 Ohm load. See our 50 ohm load product, designed specifically for terminating Triplexer ports.The Tactical Radio Gear, HF Triplexer System, enables a Single Triband 20M/15M/10M Antenna to use a Single Feed-line, allowing three Stations to simultaneously operate using the same antenna; for Multi-operator contest stations, DXpeditions and Field Day groups, and in EMCOM applications.The Tactical Radio Gear, TACOM Series of Triplexer products, removes the need for a separate mono-band antenna for 20M/15M/10M bands. Three operators, three stations, but just one feed-line, and one antenna!Create a triplexer system, with out a combination of our Band Pass Filter packs and a triplexer.The objective, of a Triplexer system & band pass filters, is to isolate each transceiver, in-order to keep them from interfering with each other. Additionally, they reduce out of band noise, improving the transceiver's noise floor. IMPORTANT: Each port much be connected through a BPF-200 series Bandpass Filter(s). Band pass filter sets, are specially priced, when purchased as 3 x set for the HF/HIGH BAND Triplexer(s).TACOM HIGH BAND Triplexers:This design has been thoroughly tested over years of use by hams around the world. Designed to allow two or three transceivers on a single 20M/15M/10M multi-band resonant antenna. No longer are separate antennas necessary to run multiple radios. The result is significantly enhanced flexibility and reduced complexity. TACOM Triplexers consist of three filters, which when combined, provide isolation between radio ports on 20M/15M/10M; provided the antenna port is connected to an appropriate antenna. (Note: External band-pass filters are necessary to protect receivers.) High Band Triplexer Specifications: Input Power (per radio port): 200 W PEP Pass Band Insertion Loss: <0.15dB Band Isolation: > 32dBReturn Loss: >26DbVSWR: 1.1Dimensions: 5-1/2" x 8.00' x 2-1/2" Hi-Q Precision Silver Mica capacitors, and heavy-duty inductors, are used in the L/C tuned circuits. Each Triplexer is individually tuned on a state of the art computer testing system. The design was engineered, with vigilant consideration to component selection. No expense was spared to insure the reliability and performance of our filters. All inductors are wound with the largest possible gauge wire, consistent with sensible design practices. HIGH Band Systems HF Multiplexers: Triplexers are available in 20M/15M/10M amateur band coverage.High Band Triplexer(s) enable multi-transceiver stations, to share a single multi-band antenna. They make multi-op antenna operations easy. Connect two or more transceivers, via a band pass filter(s), to a single multi-band antenna, capable of the preferred bands, and operate multiple radios on one antenna! Both model of Triplexers are supplied with standard SO-239 connectors, others are available on request. These Triplexers are great for Field Day, contesting and multi-op DXing. Perfect anytime the operation of multiple rigs, on one multi-band antenna is needed. Any multi-band resonant antenna can be used with our triplexers. It is essential that a <1.5:1 antenna match is present at the triplexer antenna port. For instructions and additional information: TACTICALRADIOGEAR.COM

Price: 275 USD

Location: Lincoln City, Oregon

End Time: 2024-11-27T03:04:00.000Z

Shipping Cost: 0 USD