Victory Amplification V4 The Copper Guitar Amp

Description: Victory Amplification V4 The Copper Guitar Amp Maker: Victory Amplification Model: V4 The Copper Amp Condition: New Description: The Copper is British inspired chime and blues in our V4 power amp pedal! Four valves in the front end, 180-watt power section, two channels, reverb and Two notes technology. Only 1.7kg / 3.75lbs – all the Copper tone in a small box!The V4 Copper amp delivers all-valve clean and overdrive, the footswitchable treble boost brings in a gain boost and creates creamy valve overdrive and sustain. It’s the amp for that classic British jangle! FEATURES All-valve preamp sound- The V4 Copper has an all-valve preamp section with 1 x EC900 and 3 x CV4014 valves running at high plate voltage, this is paired with a solid state power section. Treble Boost- Designed to be like a gain boost, this treble boost circuit helps to push the V4’s front end to create creamy valve overdrive and sustain. The non treble boost side goes from clean through to slightly pushed, both sides have their own volumes controls. Reverb- Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately). Two notes Technology- Two notes Audio engineering Torpedo-embedded DynIR Virtual Cabinet technology is onboard the Copper. The Cab Sim XLR makes is super easy to take you Victory virtual cabinets anywhere. The presets have been created by Chris Buck for the Copper. Series Effects Loop- Sits between the preamp and power amp. Run your time-based effects here for maximum clarity. Balanced Line Out and Headphone Out- Send a direct feed to a separate speaker simulator, front of house or wherever you like. Can be used with or without a speaker connected. The inbuilt headphone output makes silent practice quick and easy. 9V DC Power Output- Want to power some extra pedals and stick this on your board? We’ve included a 9V DC centre-negative output that will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on. VRC – Valve Response Circuit- The idea behind this little piece of the circuit is to mimic what a “resonance” or “thump” (other adjectives are available!) control does in the power amp of a valve amp. So with the V.R.C (™) circuit you get closer to how a valve power section should feel but in a tiny amp you can throw in your backpack and still get up to 180 watts of power! Three-Band EQ- Powerful bass, middle and treble controls to shape your tone. These also have an effect on the gain character and drive levels – just like in any valve guitar amp. TWO NOTES TECHNOLOGY- We have partnered with the incredibly talented folks at Two notes Audio Engineering to embed their incredible tech in our V4 Copper Guitar amp. Straight out of the box you have access to six presets created by Victory artist Chris Buck. These have been specifically created by Chris for the V4 Copper guitar amp. There are ten Victory virtual cabinets included with the amp and a collection of microphones and positions to choose and build your own presets. All this can be accessed by plugging the V4 Copper guitar amp into your computer, via Torpedo Remote (download for free from the Two notes website) – this is also where you access the power amp modes, rooms, studio-grade EQ and audio enhancer. Register your device with Two notes to gain access to a further two Two notes DynIR cabs. THE STORY OF THE V4 AMP VALVES! The V4 amps have some interesting valves in them, to be specific 3 CV4014’s and 1 EC900. The CV4014’s were made in 1981 in the Mullard factory in England and then stored in a climate-controlled atmosphere deep underground, the depot was part of a cold-war nuclear bunker! They lay there until we decided to design some products from them! The EC900 were made by E.I (Elektronska Industrija) in the former Yugoslavia under license from Phillips and Mullard, they were produced to an incredibly high standard so much so, we have included a 2-year valve warranty on the V4 amps. TECH SPEC FORMAT:Guitar Amplifier Head PREAMP VALVES:1 x EC900, 3 x CV4014 POWER OUTPUT:180W @ 4 ohms (approx 90W @ 8 ohms, 45W @ 16 ohms) POWER REQUIREMENTS:Mains IEC SIZE:258(w) x 174(h) x 105mm(d) inc feet & knobs WEIGHT:1.7kg (3.75lbs) EXTRA FEATURES: Aluminium chassis Reverb Two notes Cab Sim Technology with 6 position preset control Three band EQ Series FX loop Balanced DI out on TRS 6.3mm jack Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative) Victory Amplification V4 The Copper Guitar Amp Maker: Victory Amplification Model: V4 The Copper Amp Condition: New Description: The Copper is British inspired chime and blues in our V4 power amp pedal! Four valves in the front end, 180-watt power section, two channels, reverb and Two notes technology. Only 1.7kg / 3.75lbs – all the Copper tone in a small box! The V4 Copper amp delivers all-valve clean and overdrive, the footswitchable treble boost brings in a gain boost and creates creamy valve overdrive and sustain. It’s the amp for that classic British jangle! FEATURES All-valve preamp sound- The V4 Copper has an all-valve preamp section with 1 x EC900 and 3 x CV4014 valves running at high plate voltage, this is paired with a solid state power section. Treble Boost- Designed to be like a gain boost, this treble boost circuit helps to push the V4’s front end to create creamy valve overdrive and sustain. The non treble boost side goes from clean through to slightly pushed, both sides have their own volumes controls. Reverb- Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately). Two notes Technology- Two notes Audio engineering Torpedo-embedded DynIR Virtual Cabinet technology is onboard the Copper. The Cab Sim XLR makes is super easy to take you Victory virtual cabinets anywhere. The presets have been created by Chris Buck for the Copper. Series Effects Loop- Sits between the preamp and power amp. Run your time-based effects here for maximum clarity. Balanced Line Out and Headphone Out- Send a direct feed to a separate speaker simulator, front of house or wherever you like. Can be uséd with or without a speaker connected. The inbuilt headphone output makes silent practice quick and easy. 9V DC Power Output- Want to power some extra pedals and stick this on your board? We’ve included a 9V DC centre-negative output that will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on. VRC – Valve Response Circuit- The idea behind this little piece of the circuit is to mimic what a “resonance” or “thump” (other adjectives are available!) control does in the power amp of a valve amp. So with the V.R.C (™) circuit you get closer to how a valve power section should feel but in a tiny amp you can throw in your backpack and still get up to 180 watts of power! Three-Band EQ- Powerful bass, middle and treble controls to shape your tone. These also have an effect on the gain character and drive levels – just like in any valve guitar amp. TWO NOTES TECHNOLOGY- We have partnered with the incredibly talented folks at Two notes Audio Engineering to embed their incredible tech in our V4 Copper Guitar amp. Straight out of the box you have access to six presets created by Victory artist Chris Buck. These have been specifically created by Chris for the V4 Copper guitar amp. There are ten Victory virtual cabinets included with the amp and a collection of microphones and positions to choose and build your own presets. All this can be accessed by plugging the V4 Copper guitar amp into your computer, via Torpedo Remote (download for free from the Two notes website) – this is also where you access the power amp modes, rooms, studio-grade EQ and audio enhancer. Register your device with Two notes to gain access to a further two Two notes DynIR cabs. THE STORY OF THE V4 AMP VALVES! The V4 amps have some interesting valves in them, to be specific 3 CV4014’s and 1 EC900. The CV4014’s were made in 1981 in the Mullard factory in England and then stored in a climate-controlled atmosphere deep underground, the depot was part of a cold-war nuclear bunker! They lay there until we decided to design some products from them! The EC900 were made by E.I (Elektronska Industrija) in the former Yugoslavia under license from Phillips and Mullard, they were produced to an incredibly high standard so much so, we have included a 2-year valve warranty on the V4 amps. TECH SPEC FORMAT:Guitar Amplifier Head PREAMP VALVES:1 x EC900, 3 x CV4014 POWER OUTPUT:180W @ 4 ohms (approx 90W @ 8 ohms, 45W @ 16 ohms) POWER REQUIREMENTS:Mains IEC SIZE:258(w) x 174(h) x 105mm(d) inc feet & knobs WEIGHT:1.7kg (3.75lbs) EXTRA FEATURES: Aluminium chassis Reverb Two notes Cab Sim Technology with 6 position preset control Three band EQ Series FX loop Balanced DI out on TRS 6.3mm jack Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative) × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like Disaster Area qCONNECT Quarter-Inch MIDI Interface and Controller Damnation Audio MBD-1 Beetronics Overhive *custom 120 Electro-Harmonix 1440 Stereo Looper Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Coast Sonic Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 14 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 999 USD

Location: Carlsbad, California

End Time: 2024-10-09T19:47:23.000Z

Shipping Cost: 0 USD